Model Number: D-0187-1 Brand Name: AODALIN Key Specifications/Special Features: Product introduction:One component polyurethane foam is used preferably for insulation and installation in the construction sectorApplication can be filling cavities, cracks, and gapsSound and heat insulation, bonding, fixing, mountingConstruction attention:All surfaces should be clean from oil, grease, dust and spray or dampen with water before useFill vertical gaps from the bottom up (pay attention to the foam expansion)The foam discharge rate can be controlled by the flow valve and triggerTurn off the flow valve at clockwise when finish

1. Before replacing new can, shake the new can vigorously about 1 min, then unscrew empty can and replace with a new foam can immediately to avoid the curing the connector of spray gun
2. Please use the special cleaning agent to clean the spray gun when it is finish
3. The foam tack free time is 10 min, and can be cut after about 20 min
4. And the foam will be cured after 1 hour, and it will become stable with 3-5 hours (All data based on application under laboratory conditions)
5. It gets decomposed by direct exposure to UV rays, so painting or coating is recommended

750mL
Executing standard: JC936
Duration: 9 months
Production date: see bottom of can